Me and I can try to find the cause of the problem. Is OK - if not please read the FAQ below. That I never tested with another address). Usually itsĪddress is 192.168.129.201, but you can change that on the Zaurus (note

Open the terminal application and try to ping the Zaurus.

Configure the new interface with a manual IP address of 192.168.129.1.

You will be notified that a new network interface is available.

Start the System Preferences application and select 'Network'.

To a free USB port, put the Zaurus into the cradle and turn it on.

After rebooting (or before, it doesn't matter) connect the cradle.

At the end of the installation process, reboot the computer (the.

Installer will place a directory 'AJZaurusUSB.kext' in the folder Double click on the extracted package ('AJZaurusUSB.pkg') and follow the instructions on screen.Download the compressed installer package (see bottom of this page).ĭouble click on the downloaded file to extract the package.

Installation of the driver is really simple: The driver is 'certified by Sharp' - at least for the SL-5600 -, so it's probably Use this software at your own risk! (However, Operating system or prevent it from booting (although both is highly unlikely). So updating to version 0.2.5 of the driver is recommendedĭisclaimer: This driver may potentially damage your This issue might also appear on OS X 10.2 (Jaguar), Versions could freeze the USB subsystem on the Mac. Is turned on and off in rapid succession, older driver In the '/System/Library/Extensions' folder. Before installing this version, you should delete the old 'AJZaurusUSB.kext'.Tested with OS X 10.3.5 and a Zaurus SL-5500. The previous version would clash with newĪpple supplied drivers. eMailĪddresses of these people can be found in the source code available Some algorithms adopted from usbnet.c written by David Brownell. Have been ported from usbdnet.c (Linux driver) written by Stuart Lynne and Tom Rushworth with (thanks to Russ Winsper for providing the latest version). This driver is based on the USBCDCEthernet example provided by Apple Important: This is not a complete sync solution! The only thing theĭriver does is to provide a network connection. On the Mac you need at least OS X 10.2.1. Compaq iPaq H3635, H3760, H3870, and H3950 running Familiar Linux.The following models are reported to work (with the It allows you to transfer data via USB so you don't needĪ network card for the PDA. This is a USB driver for connecting Linux PDAs to a computer running Please note: Development of this driver is continued

Free software for mac os x 10.3.5